آخرین اخبار

ژنراتورهای جدید 2015 کای جی الی رسید جهت اطلاع از قیمت ها با ما تماس حاصل فرمائید.

بیشتر...

ولتاژ رگولاتور

ولتاژ رگولاتور

  • Technical specification
  • INPUT
  • Voltage 190-264V ac
  • Frequency 50-60 Hz nominal
  • Phase 1
  • Wire 2
  • OUTPUT
  • Voltage max 90V dc at 207V ac input
  • Current continuous 4A dc
  • Intermittent 6A for 10 secs
  • Resistance 15 ohms minimum
  • REGULATION
  • +/- 1% (see note 1)
  • THERMAL DRIFT
  • 0.04% per deg. C change in AVR ambient (note 2)
  • TYPICAL SYSTEM RESPONSE
  • AVR response 20ms
  • Filed current to 90% 80 ms
  • Machine Volts to 97% 300ms
  • EXTERNAL VOLTAGE ADJUSTMENT
  • +/-10% with 1 k ohm 1 watt trimmer (see note 3)
  • UNDER FREQUENCY PROTECTION
  • Set point 95% Hz (see note 4)
  • Slope 170% down to 30 Hz
  • UNIT POWER DISSIPATION
  • 12 watts maximum
  • BUILD UP VOLTAGE
  • 4 Volts @ AVR terminals
  • ANALOGUE INPUT
  • Maximum input +/- 5V dc (see note 5)
  • Sensitivity 1v for 5% Generator Volts (adjustable)
  • Input resistance 1k ohm
  • QUADRATURE DROOP INPUT
  • 10 ohms burden
  • Max. sensitivity: 0.07 A for 5% droop 0PF
  • Max. input: 0.33A
  • ENVIRONMENTAL
  • Vibration 20-100 Hz 50mm/sec
  • 100Hz – 2kHz 3.3g
  • Operating temperature -40 to +70 oC
  • Relative Humidity 0-70 oC 95% (see note 6)
  • Storage temperature -55 to +80 oC
  • NOTES
  • 1. With 4% engine governing.
  • 2. After 10 minutes.
  • 3. Applies to Mod status S onwards. Generator de-rate
  • may apply. Check with factory.
  • 4. Factory set, semi-sealed, jumper selectable.
  • 5. Any device connected to the analogue input must be
  • fully floating (galvanically isolated from ground), with an
  • insulation strength of 500V ac.
  • 6. Non condensing